How to Fix Aluminum Patio Furniture

How to Fix Aluminum Patio Furniture

Below are some tips on how to fix aluminum patio furniture. Painting instructions are also provided in case you want to give it a new finish.

Fixing Chipped Aluminum Patio Furniture

Required Tools and Materials

Wire brush
Scrub brush
Cleanser
Superglue
Spatula
Fine wire mesh
Bondo
Mask
Latex gloves
Soapy water
Rough and fine sandpaper
Spray paint
Degreaser

Step 1

Clean the furniture with soapy water and the scrub brush. Scrub vigorously on the damaged parts. If the dirt is excessive, use a degreaser.

Step 2

Use the wire brush to remove the rust and paint all over the affected areas. Make sure that all the dirt and dust has been thoroughly removed.

Step 3

To fix aluminum patio furniture, you need to put the wire mesh on the rear of the patio furniture. Apply as much superglue as needed (you can use epoxy too). Give the glue time to dry.

Step 4

Prepare the body repair paste. For Bondo and similar products, the end result should be a substance that’s thick but can be spread. Do not work in large amounts as they’ll harden too quickly. Put the mixture in the cracks and fissures. Try to make it as even as possible.

Step 5

Sand the area, going from rough to fine grit. Remove any dust and debris. After you fix aluminum patio furniture, you can add as many coatings as you want.

How to Paint Aluminum Patio Furniture

Required Tools and materials

Big brush
Rustproof paint
Rust remover
Mild detergent
Spray paint
Water

Step 1

Before you paint the furniture, take off the cushions and other accessories on it. Set the furniture in an area where paint won’t damage other items. If necessary, put plastic coverings on the floor.

Step 2

Dip the sponge in the detergent. Wash the aluminum furniture. Take out the loose paint and other broken parts. Scrape off the rough parts and make the surface as smooth as possible.

Step 3

Use the rust remover to eliminate the rust. Repeat this process as often as necessary. Soak the sponge in the mild detergent. Clean the furniture again.

Step 4

To fix aluminum patio furniture, start painting. If the furniture is small, use the spray paint instead. If painting chairs and tables, use the large brushes.

Step 5

Allow the paint to dry before putting on a second coat. This is particular important if the color foundation is dark. You’ll also need to use a large brush if you had to remove lots of paint. Allow the furniture to dry.

Tips and Warnings

Put on a face mask when you are painting. Do not take off your gloves during the process so no paint gets on your hands. When painting, the aluminum patio furniture should be kept away from rain. If the damage is extensive, have it repaired by a qualified repairman.

By knowing how to fix aluminum patio furniture, you’ll be able to preserve them. Well maintained, the patio furniture should make your surroundings more attractive.