Knowing how to build a gate is a very useful skill. In this example, you will be making a gate for the driveway.
Required Tools and Materials
Paint or varnish (optional)
Gate latch
Hinges
Screws
Bolts
Drill and drill bits
Screwdriver
Hammer and nails
Circular saw and handsaw
Lumber
Step 1
Decide where the gate will be set along the driveway. If you have a fence, just measure the distance from the posts. Determine the gate height too. This will be based on the posts’ height.
Step 2
Design the gate now. Make it as detailed as possible.
Step 3
Using the design you made as reference, cut the lumber. Make sure the measurements are correct. Chop all the pieces.
Step 4
Set them on the ground near the driveway. Double check and line the pieces up correctly.
Step 5
To learn how to build a gate, you should begin with the outer frame. Fasten the pieces by using the drill. Use it to make openings for the screws. Use the screws and the bolts so the frame is strong.
Step 6
Put the crosspieces in place after you build the outer frame. Bolt them into place. If required by the design, fill up the frame. Use the nails, screws and bolts as required.
Step 7
Put the brass piece on the gate’s end. This will be used to keep the hinges in place. You can also put a brace piece at the other end. You will add the latch here.
Step 8
Put the hinges in place. Now you can latch the assembly on your gate. Make sure to note the area for installing. Drill holes for the screws. Put the screws in using the screwdriver. Make certain the latch and the hinges are set in position.
Step 9
Put the gate in place. Do some tests to make sure the gate is working. Try swinging the gate. Ensure the side posts and the latch assembly is aligned.
Step 10
The last step is to varnish or paint the gate. It is true you can paint the pieces beforehand. However, it is much simpler to paint after the gate has been installed.
Learning how to build a gate is not as easy as other DIY projects. You also have to make sure all the parts are working properly. If you are having trouble coming up with a design, visit your local hardware store. They will have design templates you can use. You can also find some templates online.
