It should come as no surprise if a waterbed gets damaged and leaks. Anything that we human beings invent will eventually get broken sooner or later. However, a waterbed won’t just leak except when it is punctured by a sharp object. You should be prepared ahead of time before such leaks occur. Here’s a walk through on how to repair a leaking waterbed.
Materials/Equipment
You’ll basically need a matching repair kit made specifically your waterbed. You should contact the manufacturer or the store where you bought it from just to make sure you’re buying the right kind of repair kit. You’ll also need some towels and old newspapers.
Procedure
The first step to repair a leaking waterbed is to identify where the leak is coming from. Wipe off any water using towels to help you find the leak. Pad several pages from an old newspaper along the perimeter of your waterbed. The first area that gets wet is the most likely place where the leak is coming from.
Run your hand along the suspected area. Damage can occur along the sides or even at the bottom of the waterbed. You might want to press down on the possible source of the leak just to make sure you have found it. Pushing gently on the sides of the mattress will also help find the leak.
Check the welds and seams since they are some of the usual places where a leak can come from. Ask someone to lift the other end of the water mattress to help find the cause of the leak. Mark the area around the leak to help you remember where it is.
Once you have located the leak figure out how large it is and if you can repair it on your own. If the damage is too large then you might have to call a professional to repair a leaking waterbed. However, if the leak is caused only by a small puncture that you can patch up, then you’ll need the repair kit for your waterbed.
The next step to repair a leaking waterbed is to clean the area of the leak. You should follow the prescribed cleaning instructions for your bed. Your repair kit will usually come with the right type of cleaning products. It is recommended that you use the said cleaning materials provided.
The repair kit will also come with instructions on how large a patch you should use. This will of course depend on the size of the leak you’re working on. Be sure to follow the instructions on how to use the materials in the kit when you repair a leaking waterbed. Cut the patch according to the specified size and apply any adhesive as directed.
Once you have the leak patched up don’t lay on the waterbed just yet. Leave the patch to dry for about a couple of hours. You should check the instructions that came with the repair kit before lying on your waterbed.
